Car Digital Video Record  DVR1100A-4Q
  DVR 1100A-4Q
 
  FEATURE
 
  • The first DVR for practical vehicle application. Record the driving accident, thief and passenger management. External camera input and monitor display.
  • User can free to use any device according to his requirement.
  • Record four channel camera input at the same time.
  • Record inside camera 10 to 40 seconds (selection by user) after ignition on for car driver and passenger record.
  • Car inside security during ignition off. Record inside camera video immediately after dome open. And record more 10 seconds to 3 minutes (selection by user) after dome close.
  • Add hardware Video Buffer for Reverse camera to avoid the video level insufficient if installer split the reverse camera video to our DVR box and original DVD two-din main box
  • Using standard SD card to record for car shockproof and cheap cost.
  • Easy OSD operation to setup system date/time and video system.
  • Using MPEG4 hardware compression method to reduce video record size.
  POWER PORT DESCRIPTION
 
Power Connect Description
1. YELLOW ---------------TO BATTERY IN.
2. RED ---------------------TO ACC IN.
3. BROWN ----------------TO DOME LIGHT –.
4. BROWN/WHITE------TO DOME LIGHT +.
5. GREEN -----------------NC.
6. BLUE --------------------DC 12V OUT ( 1A ) for Camera Power.
7. WHITE ------------------NC.
8. WHITE / RED----------TO REVERSE.
9. PINK/WHITE-----------REVERSE CCD Video Out.
10. PINK ---------------------NC.
11. BLACK ------------------TO GND.
12. BLACK ------------------TO GND.
 

SPECIFICATION

VIDEO
Video Encode Method MPEG4, Simple Profile Video Input System 4CH CVBS, NTSC / PAL
Video Encode Resolution QVGA(320x240), 30 fps Video Output System 1CH CVBS, NTSC / PAL
Video Encode Bit Rate CBR , 500Kbps Video File Format Advanced Systems Format(*.asf)
AUDIO
Audio Encode Method ADPCM Audio Input System Microphone in Option: Stereo Line in
Audio Sampling Frequency 44100 bps Audio Output System Option: Stereo Line out
I/O INTERACE
Video Input Connector 4*RCA, 1.0V ± 20m Vp-p, 75 Ohm Video Output Connector 1xRCA, 1.0V ± 20m Vp-p, 75 Ohm
Microphone Connector Ear Phone Jack(female) Power Supply Connector 12 Pin(Wire to Board)
IR Sensor Connector S-terminal (4 pin mini DIM) Power Input Voltage DC 12V ( 9V to 36V)
Software Update Connector Mini USB, type B (Invisible) Memory Card Standard Secure Digital Card (SD 1.1), 4 GBytes Maximum)
ACCESSORY
Power Cable 1 piece, 0.6 Meter Remote Controller 1 piece, 9 Keys
Microphone Cable 1 piece, 2 Meter IR Sensor Cable 1 piece, 3 Meter Cable, power signal LED
Manual 1 piece(English)    
GENERAL
Dimension(STB) 142x101x 33 mm Weight(STB) 0.2 Kg
OSD Language English Power indicator LED On IR sensor cable
Working Temperature + 0 ° C to + 70 ° C Storage Temperature -20 ° C to + 85 ° C
Power Consumption Working mode: 4.8 W(400mA) Standby mode: 0.12 W(10mA)    
 

Copyrights 2006 by Digimobo Technology Inc. Last updated: 9/22'20 Best view with 800X600 Design by DIGIMOBO.